The Timbren Suspension Enhancement System part # TNRTTNA is a great option for a 2017 Nissan Titan XD. It should engage fully with that amount of tongue weight so there should not be any pogoing but then again, this is not something that we can really arcuately predict. In order to provide support you must stiffen the suspension so a decrease in ride quality in inevitable.
If you are concerned with pogoing, the best option would be something that engages right away like air bags, the Air... view full answer...
Let's start with the rear suspension help for your 2018 Nissan Titan XD, and for the best overall support I do recommend air bags for your truck, with the correct fit being the Firestone Ride-Rite Air Helper Springs # F2594.
These air bags - which I confirmed with Firestone are a fit for your '18 Titan XD with the factory gooseneck - are going to provide you with the most comfortable and controlled ride not only because of their strength but because you can customize the correct air pressure... view full answer...
Since you have a pivoting pin box with the Lippert Turning Point you do not need to use a slider hitch to gain additional turning clearance. This means you need a fixed hitch like the Curt A16 part # C165020-16026 which is a confirmed fit for the factory gooseneck setup of your 2018 Nissan Titan XD. As long as you use the correct wedge part # C16992 this setup is perfectly safe and actually one of the nicest 5th wheel towing setups you can get.
I hope that clears everything up! view full answer...
You would have to remove your skid plate to install the front hitch part # 65072 unfortunately. You shouldn't have to worry about removing the front hitch to change the oil though.
There would also be some slight air dam trimming to install the hitch as well. view full answer...
I have a really great fifth wheel solution for your 2019 Nissan Titan XD that has the factory rail kit with the Demco Recon 5th Wheel Trailer Hitch # DM8550045-5W. This hitch will attach to the factory gooseneck ball of your rail kit, is lighter weight at 150 lbs, easily breaks down into smaller pieces to make managing the weight of the hitch much easier as well, and has a jaw design that holds the king pin of the trailer very tightly which translates into a very quiet and smooth ride quality.... view full answer...
I am looking at their online fitguide and they call out the fit of the part # TNRTTNA for your 2017 Nissan Titan XD if it is a 4 wheel drive which also matches the fit info they gave us when we listed this part number as a fit for your truck. Since you have a 2 wheel drive truck a much better option that is a confirmed fit is the # RAS3611. With this kit you get better support than the Timbren plus a better ride quality overall. view full answer...
We have several Tonneau covers that will work with your 2016 Titan XD.
If you are looking for a hard, folding cover I recommend the BAKFlip FiberMax Hard Tonneau Cover, part # BAK126524. This tough cover is constructed of 1/2 inch thick panels that resists harmful UV rays. No drilling is needed for installation.
If you are interested in a soft, roll-up cover I recommend the Access Vanish Soft, Roll-Up Tonneau Cover, part # A93219. There is no drilling needed to install this cover and... view full answer...
The easiest and lightest 5th wheel hitch available that will attach to the factory gooseneck pucks in your 2017 Nissan Titan XD and is compatible with a rotating pin box is the Curt E16 # C16515-16026. This hitch features an overall weight of 195 pounds but one of its benefits is that it uses a 2-pin head removal design that lets you easily take the hitch out of the bed in a couple of more manageable pieces.
For reference the head assembly by itself weighs 68 pounds and the base weighs... view full answer...
For your 2016 Nissan Titan XD with a 6.6 bed and the factory gooseneck puck system I recommend Demco 5th Wheel Rail Adapter for Nissan Titan XD OEM 5th Wheel Towing Prep Package # DM6200, this will attach to your gooseneck hitch and allow you to use the Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider # DM8550034. Since your Titan's bed is less than 8 ft, a slider will be needed for additional clearance to avoid cab and trailer interference.
I really like the auto-slide feature... view full answer...
Most likely you have a Lippert screen door as that is the most common brand of RV screen door out there. I attached a picture of a standard Lippert door for you to compare what you have to. You can also go over the door looking for any brand info listed there as well. view full answer...
Yes, the Demco 5th Wheel Rail Adapter # DM6200 along with the Demco Hijacker Autoslide 5th Wheel Hitch # DM8550034 will work perfectly on your 2019 Nissan Titan XD short bed that is equipped with the factory rail kit. The adapter will drop right into the factory pucks on the truck bed to provide the needed rails compatible with the Hijacker.
This is an excellent setup for your Nissan Titan XD and the Hijacker's automatic slider will give you the needed cab clearance during sharper turns.... view full answer...
Rhino Rack has a confirmed roof rack solution for your 2017 Nissan Titan XD but they do not offer replacement fit kits for the older style of rack you currently have.
Instead you would need to go with the part numbers # RRVA150S-2, # RRRLKVA, and # DK468 which is a confirmed fit. view full answer...
Since hitch extenders for 2 inch hitches aren't rated for use with weight distribution systems you'd need to go with a longer shank like the Curt # C17122 which is 14 inches long or even the longer part # EQ90-02-4600 which is 18 inches long. view full answer...
Rhino Rack does have a roof rack that fits your 2017 Nissan Titan XD with a naked roof with the part numbers # RRVA150B-2, # RRRLKVA, # DK468. With these three part numbers you'd have everything you'd need to install a Rhino Rack roof rack. view full answer...
Of all of the gooseneck balls we offer for your 2019 Titan XD the part # BWGNXA2061 would give you the tightest fit and wouldn't have the play you have now. We have found that the USA made B and W towing products are made to the highest quality standards and are therefore the most reliable. view full answer...
For your 2021 Nissan Titan XD I recommend the Demco Hijacker Autoslide 5th Wheel Trailer Hitch w/ Slider - Single Jaw - Above Bed - 18,000 lbs # DM8550034.
With a 6-1/2 foot truck bed you need to use a slider hitch so you have enough turning clearance. This hitch automatically slides as you make turns giving you an additional 14 inches of clearance. You will also need the Demco 5th Wheel Rail Adapter for Nissan Titan XD OEM 5th Wheel Towing Prep Package - 21,000 lbs # DM6200 to make this... view full answer...
We have have the 7k trailer hub part # 42866UC3-EZ which would fit and work great on your current spindle. The bearing numbers may be slightly different but the fit on your spindle is exact same. This also has the same bolt pattern as what you have now too of 8 on 6-1/2 inch. view full answer...
If your fifth wheel trailer was able to be towed by a similar truck with the same bed length as your 2017 Nissan Titan XD and a slider hitch wasn't needed we have the Curt hitch part # C16520-16026 that will fit the factory rail kit of your truck and would work well.
This is a stationary hitch confirmed to fit the 2017 Nissan factory rail kit like what you have. view full answer...
I have another option for you, but while the frame your 2017 Nissan NV 2500 uses is similar to the frame of the 2017 Nissan Titan, there were quite a few changes made to it to work with the van body. With that said the Curt # C31077 you were looking at is not confirmed to fit.
Since there is not a front mount trailer hitch receiver confirmed to fit your best bet is going to be to install a universal hitch like the Draw-Tite # 41990-07 that has 7" tall mounting brackets or the # 41990-16... view full answer...
Go To Results